SquareLED Blade 5 Quadcolor 48 x 10 Watt 35° RGBW IP65 Floodlight
SquareLED Blade 5 Quadcolor 48 x 10 Watt 35° RGBW IP65 Floodlight
500W | 15.000lm | 35° | IP65
The Blade 5 is equipped with 48 pieces of high power LEDs, each with 10W and a LED lifetime of over 50,000 hours. The device works nearly without any noise - so an use in areas where no noise can be accepted is absolutely possible.
This RGBW LED wash light in its beautiful and slim design is ideal for applications where a maximum of light intensity is desired - in live shows, television, theater, trade shows, fashion shows, or architectural applications.
In addition to a wide range of saturated colors the Blade 5 offers through its RGBW LEDs the full range of pastel shades and brilliant white light in several colortemperatures with unexpected brightness in flickerfree operation (2000Hz scan rate). Available beam angles are 25 and 35 degrees.
The Blade 5 is characterized by its IP65 protection class and so full outdoor capable. An indoor version with protection class IP43 is also available.
Optics
Light source: 500W 48 x RGBW 4in1 10W LEDs (both strobe & wash modes are available)
LEDs expected lifetime: 50,000 hours*
Light output: 15,000 lm (35° lens)
Features
Pan/Tilt: 0° / 120°
Electrical
AC Power nominal: 100 – 240V 50/60 Hz
AC Power max rating 100 – 240V 50/60 Hz
Maximum power consumption: 500 W (all LEDs on)
Programming and Control
Protocol: USITT DMX512 A
Setting and addressing: Standalone, Master/Slave, Auto Mode
DMX channels: 1/2/3/4/6/8F/9F/10F/10D/14D/15F selectable for numerous applications
Physical
Dimensions (L x H x W): 478 x 313 x 144mm
Weight: 9 Kg
Material: Die-casting Aluminum
Lens: PE and tempered glass
IP class (waterproof): IP43 / IP65 selectable
Installation
Orientation: Any
Rigging possibilities: Floor stand or hanging (Omega Clamp included)
Safety features: Bottom mount for Safety wire
Thermal
Temperature range, Operating: -10° to +40°C (14° - 104°F)
Humidity (max.): 98%
Safety features: Active, forced air, temperature-regulated, low noise fan
Connections
DMX data in/out (indoor version): IP65 Neutrik HD locking XLR 3 or 5-pin connectors, for DMX in and out
Screened cables in compliance with EIA RS-485 specifications: 2 conductors plus screen, 120 Ohm impedance, max. transmission 250kBaud.
Power cable 1m with bare ends
Conforms to
Certifications CE and RoHS2
Waterproof grade: IP43 / IP65
Included Items
Safety Cable & eyebolt
power Cord
User Manual
Features and Accessories
Built-in over heat protection temperature sensor to extend the lamp life
16-bit dimmer
DMX-controlled operation or stand alone operation with Master/Slave-function
Color calibrate function
4-button easy to use LCD control panel menu
3 or 5-pin DMX Input/Output
PowerCon compatible AC power In/Out connectors
DMX-512 connection with DMX terminator, XLR plug with 120 OHM resistor connected between pins 2 and 3 plugged into the output XLR socket of the last fixture in the chain (when DMX cable has to run a long distance in an electrically noisy environment)
- lamp type
- RGBW LED
- power | Watt
-
- 500
- beam angle
- 35°
- color temperature
- RGBW
- DMX channels
- 1/2/3/4/6 / 8F / 9F / 10F / 10D / 14D / 15F
- outreach
- Light output: 15,000 lm
- PAN / TILT
- Pan / Tilt: 0° / 120°
- control
-
- USITT DMX512 A
- Standalone, Master / Slave, Auto-Modus
- effects
-
- strobe & wash modes
- protection class
- IP65
- power connection
- Powercon
- data connection
-
- XLR 5-pin IN/PUT
This product has not been reviewed yet.
Our brand for selected product imports from Asia.
Since 2010, under this brand we have been marketing innovative products that inspire us.
Manual Blade 5 neu- Material number
- 18510
- Height
- 32cm
- Width
- 52cm
- Depth
- 14cm
- Weight
- 14kg
- Product state:
- New
- Categories:
- outdoor
